Harvester Bar Range
GB
Tiatanium Harvester
| LENGTH |
14"
- 36" |
| GROOVE |
.063"+
.080" |
| PITCH |
.404" |
| NOSE |
11
tooth |
The New Orange Bar has a complete
New Bar Tip System, which minimizes chain contact loads and maximises
sprocket strength, resulting in less breakage of sprocket teeth and sprocket.
Manufactured to exacting tolerances to maintain precision clearances for
sprocket rotation providing less spocket heating.
The New Bar also gives longer bearing life and a resistance to nose spreading.
3/4"
Pitch Titanium Harvester Bar.404"
GB introduce the latest
in efficiency and design.
25"
- 52"
.122"
3/4"
Sprocket
The 3/4" Pitch Sprocket Nose Bar has an innovative locking system.
Harvester Products
18H
11H
11BC
404
Carlton Saw Chain
CARTON
HARVESTER CHAIN B3M/B5M
Mechanical harvester saw chain
which features Carlton's exclusive TCR chassis.
| TYPE | PITCH | GAUGE |
| B3M | .404" | .063" |
| B5M | .404" | .080" |
CARLTON HARVESTER CHAIN G7S
Carlton G7S is designed for mechanical harvesters. It is designed with thicker tie straps and cutter bodies for longer life.
| TYPE | PITCH | GUAGE |
| G7S | 3/4" | .122" |
Harvester Sprockets
The
GB Centre Drive Harvester Sprocket replaces any RIM or SPUR type sprocket
system you are currently using. GB Centre Drive Harvester Sprockets
last longer, saving you time and money.
GB harvester
sprocket is manufactured from precision investment casting.
Fully reversible optimum steel heat treatment for extra life, durability
and strength.
Suits: .063" (1.6mm) guage, .080" (2.00mm) guage.
.404" SPROCKETS AVAILABLE
| BORE CODE | PITCH | TEETH | PART No. | SANDVIK
PART No. |
OREGON PART No. |
A
SPLINE |
.404" | 10 11 12 13 14 |
A-10-404 A-11-404 A-12-404 A-13-404 A--14404 |
RSA-10 RSA-11 RSA-12 RSA-13 RSA- 14 |
OR-A10-404 OR-A11-404 OR-A12-404 OR-A13-404 OR-A14-404 |
BF
20mm |
.404" | 9 10 11 12 13 14 |
BF-9-404 BF-10-404 BF-11-404 BF-12-404 BF-13-404 BF-14-404 |
RSB-9 RSB-10 RSB-11 RSB-12 RSB-13 RSB- 14 |
OR-B9-404 OR-B10-404 OR-B11-404 OR-B12-404 OR-B13-404 OR-B14-404 |
CDE
25mm |
.404" | 10 11 12 13 14 15 |
CDE-10-404 CDE-11-404 CDE-12-404 CDE-13-404 CDE-14-404 CDE-15-404 |
RSC-10 RSC-11 RSC-12 RSC-13 RSC-14 RSC- 15 |
OR-C10-404 OR-C11-404 OR-C12-404 OR-C13-404 OR-C14-404 OR-C15-404 |
3/4" PITCH
| PART No. | SUITABILITY | CHAIN TYPE | PITCH | No. TEETH | BORE | KEY | TYPE |
 |
Timbco | G7S | 3/4 | 9 | 1 1/4" | 5/16" | RIM |
 |
Timberline | G7S | 3/4 | 9 | 1 1/4" | 5/16" | RIM |
 |
Waratah | G7S | 3/4 | 9 | 30mm | 8mm | RIM |
 |
Log Mate | G7S | 3/4 | 9 | 35mm | 10mm | RIM |
 |
Log Mate | G7S | 3/4 | 9 | 35mm | 10mm | RIM |
 |
Unicon | G7S | 3/4 | 9 | 54mm | 16mm | RIM |